Matte black kitchen with a wood-front island, brass pendants and a long cabinet run
Home / Blog / Condo kitchen cabinets: planning around building and HOA rules
Planning

Condo kitchen cabinets: planning around building and HOA rules

How to plan a custom kitchen or closet in a South Florida condo: association approval, work hours, getting the cabinets into the building and designing for a fixed layout.

A lot of South Florida living happens in condo towers, from Fort Lauderdale beach and the Galt to Hallandale Beach, Aventura and Brickell. Renovating a condo kitchen is different from renovating a house. The design challenge is a fixed layout, and the logistics challenge is the building. This guide covers both, from the point of view of a shop that builds and installs in condo buildings.

Start with the association

Almost every condo association has renovation rules. The details vary from building to building, so get your building's package from management before you finalize anything. Typically it covers:

  • An application or approval process for the renovation, sometimes with drawings and a scope of work. Ask how long approval takes, because that's often the first delay.
  • Contractor paperwork, usually proof of insurance, often with the association named as additional insured, and sometimes licensing information.
  • Work hours, often weekdays only within set hours, and sometimes restrictions during holidays or peak season.
  • Elevator and loading dock reservations, with protection pads on the elevator.
  • Common-area protection for hallways and floors.
  • Noise rules and sometimes limits on certain tools.
  • Permits where the city requires them, depending on what's being changed. Plumbing and electrical changes are more likely to need a permit than a straight cabinet swap; check with the building and the city.

Logistics: getting cabinets up there

Every cabinet has to fit through the loading dock, into the service elevator and down the hallway into your unit, so the elevator interior and door, the hallway turns and the unit's front door are checked at the measure and the piece sizes are shown in the drawings. Tall pantry cabinets and long island panels are the usual problems. We coordinate the install with your building management.

Because work hours are limited, an efficient install matters. Cabinets that arrive built, finished and ready, rather than assembled in your living room, mean fewer days with the crew in the building.

Designing for a fixed layout

In most condos, the walls, plumbing stacks and exhaust routes are where they are. That shapes the design:

  • Plumbing stays put. Moving a sink across the kitchen may not be possible, or may need the association's approval. Plan the layout around the existing locations unless you've confirmed otherwise.
  • Go to the ceiling. Full-height upper cabinets add a lot of storage in a small kitchen. Odd soffits and beams can be wrapped or built around.
  • Integrated appliances. Panel-ready refrigerators and dishwashers make a small kitchen look calmer and bigger.
  • Open to the living room. Many condo kitchens face the living area. Treat the visible side of the island or peninsula as furniture, and think about how the kitchen looks from the sofa.
  • Drawers over doors. Deep drawers on Blum runners are easier to use than base cabinets with doors, and use space better.

Condo climate and materials

Beachfront towers see salt air, and units are often left closed for months by seasonal owners. Plywood boxes, sealed finishes and good hardware tolerate that better. Keep the AC running when you're away. More in our humidity guide and plywood vs particleboard vs MDF.

Countertops in condos

Large stone slabs also have to come up the elevator, and long tops may need seams to fit. Talk to your fabricator about slab size and seam locations before you choose. See planning cabinets around your countertops.

If you're seasonal

Many condo owners aren't here year-round. A renovation can still work: measure and approve drawings on one visit, and schedule the install for when you're back, or arrange access with management and a trusted contact. Ask the building whether contractors can work in the unit while you're away.

Beyond the kitchen

The same rules apply to closets, wall units and vanities. In a condo, a well-planned custom closet or a wall unit that replaces freestanding furniture often makes the biggest difference to how the unit lives.

How long it takes

Our lead time is 4–8 weeks after drawings are approved, and that's built in our own shop. In a condo, add the association's approval time before that, and the countertop fabricator's time after the cabinets go in. Ask your building early; approval is often the longest wait and the one you control least.

A checklist before you call

  1. Get the renovation package and approval timeline from management.
  2. Find out the elevator size and the booking rules.
  3. Know your building's work hours.
  4. Decide whether any plumbing or electrical is moving.
  5. Pick your appliance models, sink and faucet.
  6. Bring photos and the floor plan to the showroom.

Where we work

We build everything in our Fort Lauderdale mill with Blum hardware and install in condo buildings across South Florida. See our pages for Fort Lauderdale, Las Olas, Hallandale Beach and Aventura, or start with kitchen cabinets.

Have a room in mind?

Send photos of the space or bring your plans to the showroom on S Andrews Ave, and we'll take it from there.