White shaker kitchen with gold pulls, a waterfall island and green floral stools
Miramar, Broward County

Custom cabinets in Miramar

Newer family homes in southwestern Broward. Built in our Fort Lauderdale mill and installed by our own crew.

Miramar

We serve Miramar

Every cabinet is built in our own mill in Fort Lauderdale and installed by our own crew. You deal with the people who build the job, from the first measure to the last door adjustment.

Miramar sits in the southwestern corner of Broward County, between Pembroke Pines and the Miami-Dade line. Builder kitchens and closets are usually designed for a floor plan, not for the way a family actually cooks, stores food or hangs clothes.

That's where custom work helps most. We measure the room you have, draw cabinets that use the wall and the ceiling, and build them in the shop from Columbia Forest PureBond plywood with Blum hardware on every door and drawer. Lead time is 4–8 weeks after the drawings are approved.

In a family house, the kitchen is rarely the only room that needs it. A laundry room with a folding counter, a reach-in or walk-in closet that actually holds the wardrobe, a drop zone by the garage and a desk wall for someone who works at home are the usual next rooms. Because everything comes out of one mill, the finish and the hardware can match from room to room, even if you do the work in phases.

Miramar is about a 30–35 minute drive southwest of our shop at 2416 S Andrews Ave.

4.8 stars from 87 Google reviews · Read them on Google

What we build for Miramar

  • Kitchen cabinets: replacing builder kitchens with cabinets and islands drawn to the room you have.
  • Custom closets: walk-ins and reach-ins planned around hanging, drawers and shoes.
  • Laundry and drop zones: counters over the machines, tall storage and a place to drop bags by the door.
  • Home offices: desks, file drawers and shelving for working from home.
  • Garage cabinets: wall cabinets, tall storage and a work surface in the garage.
White handleless laundry room cabinets with a stone counter over front-load machines, a sink, hanging rods and full-height uppers

Shown: white handleless laundry room cabinets with a stone counter over front-load machines, a sink, hanging rods and full-height uppers. A finished Delta Woodworks job. We don't publish client locations.

Homes & buildings

Builder houses and everyday rooms

A builder house is usually sold with a standard cabinet package: a set number of boxes, a standard-height upper and a closet with a shelf and a rod. Custom work starts from the opposite direction. We measure the walls, the soffits, the appliances you want and the way you use the room, then we draw the cabinets to fit.

Kitchens in these houses often have a peninsula or a small island that doesn't really serve as a work surface. A new run can fix the work triangle, add drawers where you actually stand, and take the uppers to the ceiling so you're not dusting the top of a short cabinet. If you're changing appliances, send the model numbers before we draw, so the openings are right.

Laundry rooms and garages do a lot of work in a family house and usually get the leftover space. We build a folding counter, a tall cabinet for the vacuum and a closed run for the things you don't want on the floor. In the garage we build wall cabinets and tall storage that sit on a proper cabinet box, not a wire shelf.

Boxes are Columbia Forest PureBond plywood, which holds up better than particleboard in South Florida humidity, and every door and drawer runs on Blum hardware. Read the best cabinet materials for South Florida humidity if you want the reasoning.

Before you start

Before you start in Miramar

  • Photograph the kitchen, the closets and any other room you might include, even if you'll do those rooms later, so finishes can be planned together.
  • Send appliance model numbers before the drawings, especially if you're changing the range, the refrigerator or the dishwasher.
  • If your community has contractor access hours or a gate, ask what's required and send us the constraints so we can plan the install around them.
  • Come to the showroom on S Andrews Ave, about 30–35 minutes northeast of Miramar, to look at doors, finishes and hardware in person.
  • Decide whether the laundry, a closet or the garage is part of this job or a later phase.
How it works

From first visit to install in Miramar

Call or visit

Call, or drive 30–35 minutes northeast to the showroom. For a family kitchen like the shaker one pictured, photos of the room and your appliance list are a good start.

We measure on site

We come to your Miramar home and measure the room ourselves before anything is drawn.

Drawings you approve

If your kitchen started as a builder layout, the drawings resize every run to the walls we measured. You approve them before we cut, and the build usually takes 4–8 weeks.

Installed by our crew

Our crew brings it from the mill to Miramar, sets every door and drawer and walks you through the finished room.

FAQ

Miramar FAQ

Do you serve Miramar?

Yes. We serve Miramar. We build in our Fort Lauderdale mill and install with our own crew.

How far is the shop from Miramar?

About a 30–35 minute drive southwest from our shop at 2416 S Andrews Ave in Fort Lauderdale, depending on traffic.

Can you replace a builder kitchen without changing the whole floor plan?

Yes. We measure the room you have and draw cabinets that use the walls and the ceiling better. If you want to move appliances or open a wall, tell us at the measure so the drawings can show it.

Can the laundry or closets be part of the same job?

Yes. We can include them in the same drawings and the same finish, or we can come back for those rooms later and still use the same samples.

How long do custom cabinets take?

Lead time is 4–8 weeks after drawings are approved.

Planning work in Miramar?

Start with a call, or come see the finishes at our showroom on S Andrews Ave before we measure in Miramar.