Home / Commercial / Medical offices
Commercial millwork

Millwork for medical and dental offices

Reception desks, nurse stations and exam-room casework, built in our own mill.

Medical offices

What we build

  • Reception and check-in desks
  • Nurse stations
  • Exam-room and treatment-room casework
  • Break rooms and storage

Medical casework gets wiped down all day, so the finish and the edges matter as much as the look. We build to the materials and heights in your drawings and, where nothing is specified, we'll walk you through the options before anything is cut.

Reception desks often need to hide cable runs, printers and storage behind a clean front. We plan those openings in the shop drawings so the electrician and the installer aren't improvising on site.

Send drawings for a bid

Planning

Planning medical and dental office casework

Reception and check-in

Decide early how many people work the desk, where the monitors, printers and card readers sit, and whether you want a lower counter section for patients who use wheelchairs. Give us the heights you need, or the ones in your architect's drawings, and we build to them.

Surfaces that get wiped all day

Exam rooms, dental operatories and nurse stations are cleaned constantly. Tell us what you clean with. That decides the face material (laminate, lacquer or paint), and tight, sealed edges matter more here than anywhere else in the building.

Power, data and plumbing

Exam-room sinks, desk power and data, and equipment under the counter all need openings planned in the shop drawings. We coordinate those with your contractor so the casework arrives ready for the trades.

Phasing in an open practice

If the office stays open during the work, tell us which rooms can close and when. The casework is cut, assembled and finished in our mill, not in your office, and we'll plan the install around your schedule.

How a commercial job runs

From drawings to install

Send drawings

PDF or DWG, plus the scope and the schedule. No drawings? We'll field-measure and draw it.

Price and timing

A straight number and a lead time.

Shop drawings for sign-off

You approve the shop drawings before anything is cut.

Fabrication and install

Built in our Fort Lauderdale mill and installed by our crew.

Built in our shop

Boxes are Columbia Forest PureBond plywood, cut on our CNC router and edge-banded on our Biesse edge bander, so the raw plywood edges are sealed. Doors and drawers run on Blum hardware. Faces can be paint, stain, lacquer, real wood veneer or high-pressure laminate, chosen for how hard the piece will be used.

Designed, fabricated and built in the USA in our Fort Lauderdale shop at 2416 S Andrews Ave, and installed by our own crew across Broward, Miami-Dade and Palm Beach County. Lead time is 4–8 weeks after shop drawings are approved.

See the machines in our mill

FAQ

Quick answers

How much does medical office millwork cost?

It depends on the size of the job, the materials, the finish and the hardware. We give a written quote after we measure and agree on drawings.

How long does it take?

Lead time is 4–8 weeks after drawings are approved, because we build every job in our own Fort Lauderdale mill.

What materials and hardware do you use?

Cabinet boxes are built from Columbia Forest PureBond plywood, and we fit Blum hardware on every door and drawer.

What areas do you serve?

We install across Miami-Dade, Broward and Palm Beach County, north to Tequesta, from our shop at 2416 S Andrews Ave in Fort Lauderdale.

Do you install the cabinets?

Yes. We build the work in our Fort Lauderdale shop and install it with our own crew.

FAQ

Questions we get

Can you work around an occupied office?

Tell us your schedule and constraints up front and we'll plan the install with you.

Do you build from the architect's drawings?

Yes. Send the drawings for a bid.

Can you match finishes across several rooms?

Yes. Because every piece is built in our own shop, the reception desk, the nurse station and the exam-room casework come from the same material and finish run.

Have drawings? Send them over.

Or call and talk to the shop directly.