Office kitchenette in dark wood with LED under-shelf lighting, a sink and a coffee station
Home / Blog / Fire-Rated Cabinets for Commercial Projects in South Florida
Commercial

Fire-Rated Cabinets for Commercial Projects in South Florida

Fire-rated cabinets for commercial projects in South Florida: what the terms mean, fire resistant materials, and who sets the requirement.

If you're building out a medical office, hotel, school, restaurant, office or condo common area in South Florida, there's a good chance the drawings call for fire-rated cabinets somewhere. The term gets used loosely on job sites, and that confusion can cost time when submittals bounce back. We build fire-rated and ADA cabinetry for commercial projects, and this guide covers what the terms mean, which fire resistant cabinet materials are common, and who decides what your project actually needs.

What "fire-rated cabinets" actually means

"Fire-rated" can point to two different ideas, and it helps to know which one your drawings are talking about.

  • Fire-resistance rating. This is usually expressed in hours and applies to building assemblies such as walls, floors and doors. It describes how long an assembly holds back a fire.
  • Surface-burning characteristics. This describes how quickly flame spreads across a material's surface and how much smoke it produces. Building codes group interior finishes into classes (commonly Class A, B or C) based on standardized testing.

Most commercial casework and millwork requirements fall into the second group. When a spec calls for "fire-rated millwork," it usually means the panels and finishes must meet a certain flame-spread class, not that the cabinet itself carries an hourly rating. Your architect's spec section will say which applies.

One more distinction: "fire-retardant" and "fire-resistant" describe materials that slow ignition and flame spread. Nothing made of wood is fireproof, and no cabinet should be sold that way.

Who sets the fire rating requirement on your project

The requirement is set by the project's design team and the authorities who review it, not by the cabinet shop. That usually means:

  • The architect of record (and sometimes a fire protection engineer), who writes the specification.
  • The local building official and fire marshal, who review the plans and enforce the Florida Building Code and the Florida Fire Prevention Code.

Which class applies can depend on the occupancy type, where the millwork sits in the building (an exit corridor is treated differently from an office) and whether the building is sprinklered. Those are judgment calls for the architect and the fire marshal.

Our job is to build exactly what the approved drawings and specs call for. If a spec is unclear, we raise the question with the design team before we order material, rather than guess.

Fire resistant cabinet materials: an overview

There is no single "fire-rated cabinet material." Commercial fire rated millwork is usually an assembly of a treated core, a surface material and an edge or finish, and the spec may address each part.

  • Fire-retardant-treated cores. Fire-retardant (FR) versions of MDF, particleboard and plywood are treated during manufacturing to slow flame spread. They are the most common starting point for rated casework. They machine much like standard panels, but each product has its own guidance on moisture, fastening and edge treatment.
  • High-pressure laminate. Many commercial laminates come in fire-rated grades. Because the rating can depend on the whole assembly, the core, laminate and adhesive are often specified together.
  • Wood veneers and site finishes. When a design calls for real wood, fire-retardant coatings or treated veneer assemblies may be specified. The finish system matters as much as the panel underneath.
  • Metal casework. Some labs and healthcare spaces specify steel or aluminum casework for durability, cleaning and fire performance.
  • Countertops and wall panels. Tops, wainscoting and wall cladding in the same room may carry their own requirements. We review the whole millwork package, not just the cabinet boxes.

For our standard custom work we use PureBond plywood and Blum hardware. On fire-rated projects, the core and surface materials follow the project's specification, as approved by the design team.

Submittals and documentation

On commercial work, the general contractor usually needs a submittal package before fabrication starts. For rated millwork that typically includes:

  • Shop drawings showing construction, materials and dimensions.
  • Manufacturer product data for the specified core, laminate and finish materials.
  • Finish samples for the architect's approval.

Your design team and the authority having jurisdiction decide what documentation they want on file. We prepare shop drawings for the review, and we'll work with your team on what else the submittal needs.

Design tips for fire rated commercial millwork

  • Specify early. Treated materials and rated laminates aren't always stocked like standard panels, so material choices should be settled before drawings are approved. Ask us about timing for your spec at the start.
  • Route substitutions through the architect. A value-engineering swap can change how an assembly performs. Any substitution should be approved by the design team, not decided in the field.
  • Plan field modifications. Cutting, adding edges or applying finishes on site can affect rated assemblies. Coordinate these with the spec before install day.
  • Think about South Florida humidity. Some treated panels respond differently to moisture than standard cores. Check the manufacturer's guidance for restrooms, pantries and wet areas.
  • Coordinate with other trades. Electrical, data and plumbing penetrations through casework should be shown on the shop drawings.

How we build fire-rated millwork for commercial projects

We build fire-rated and ADA cabinetry in our own Fort Lauderdale mill. You can see how we work on our mill page and our commercial work on our commercial cabinetry page.

Here's how a typical project runs:

  1. Drawings and spec review. We review the architect's drawings and spec, then produce shop drawings.
  2. Approval. The design team and general contractor review and approve the shop drawings and submittals.
  3. Fabrication. Timing depends on the materials the approved spec calls for, so raise it early.
  4. Installation. Our own crew installs.

We work directly with general contractors, architects and interior designers; see our page for designers and builders. Fire-rated work also comes up in hotel millwork and hotel lobby millwork, and accessibility requirements often come with it; see our guide to ADA-compliant cabinets. The same mill builds our custom kitchens. We're rated 4.8 on Google from 87 reviews.

We serve Broward, Miami-Dade and Palm Beach counties; see our service areas. To talk through a project, call 954-939-8579 or visit our showroom at 2416 S Andrews Ave, Fort Lauderdale, FL 33316, Monday through Friday, 9 to 5.

FAQ

Frequently asked questions

Are fire-rated cabinets the same as fireproof cabinets?

No. Fire-rated and fire-retardant materials are made to slow ignition and limit flame spread. Nothing made of wood is fireproof. The goal is to meet the flame-spread class or other requirement your project's design team sets.

Who decides whether my project needs fire-rated cabinets?

Your architect of record writes the requirement into the specification, and the local building official and fire marshal enforce it. The cabinet shop builds to that spec. If you're unsure, ask your architect which spec section covers casework and millwork.

Can fire-rated cabinets look like regular custom cabinets?

In many cases, yes. Fire-rated laminates and finish systems come in a wide range of colors and textures, though selection can be narrower than standard materials. Your architect approves the final finishes.

How long does it take to build fire-rated cabinets?

It depends on the materials your spec calls for. Rated materials must be specified and approved first, so settle material choices early and ask us about timing for your project.

Have drawings for a commercial job?

Send the plans or a floor plan, or call the shop to talk through scope and timing.