"Custom cabinets" gets used loosely. Showrooms, big-box stores and online sellers all use the word, but the cabinets behind it are built in very different ways. Before you compare quotes, it helps to know the four main categories: stock, ready-to-assemble (RTA), semi-custom and fully custom.
The short answer
- Stock cabinets are pre-built in a fixed set of sizes and finishes and sold off the shelf or from a warehouse.
- RTA cabinets are stock-style cabinets shipped flat in boxes, to be assembled by you or an installer.
- Semi-custom cabinets start from a factory catalog of standard boxes, with more sizes, finishes and options to choose from.
- Custom cabinets are drawn and built for one specific room, to its real measurements, with no catalog limiting the sizes.
The difference that matters most isn't the door style. It's who decides the box sizes: a catalog, or the measurements of your room.
What are stock cabinets?
Stock cabinets are made in large runs in standard widths, usually in 3-inch steps, in a handful of door styles and colors. Because they're already built, they're often available quickly. The trade-off is fit. Real walls are rarely a neat multiple of 3 inches, so the gaps get filled with filler strips, and corners, soffits and columns get worked around rather than used.
Stock cabinets make sense for rentals, a garage, a laundry room or a tight budget where speed matters more than fit. Many stock lines use particleboard boxes; ask, because that matters in a humid climate (more on that below).
What are RTA cabinets?
Ready-to-assemble cabinets are flat-packed: panels, hardware and instructions in a box. They cost less to ship and store, which is why online sellers like them. Quality ranges widely, from thin particleboard to plywood boxes with decent hardware. The sizes are still catalog sizes, and the quality of the finished kitchen depends heavily on whoever assembles and installs them.
What are semi-custom cabinets?
Semi-custom cabinets come from a factory catalog too, but a bigger one: more widths and heights, more door styles and finishes, and options like deeper boxes, pull-outs and modified sizes. A designer combines standard boxes into a layout for your room. This is what many showrooms sell, and it can produce a good kitchen.
The limits show up at the edges. Box sizes still come from the catalog, so odd dimensions are handled with fillers and panels. Lead times depend on the factory's schedule and shipping, and a damaged or mis-measured box means re-ordering from the factory. Some semi-custom lines are made overseas; if origin matters to you, ask where the boxes are actually built.
What makes a cabinet truly custom?
A custom cabinet is designed for one room and built to fit it. There is no catalog of box sizes: if a wall is 131 and a quarter inches, the cabinets are drawn to that wall. That's what lets custom work handle the things that trip up catalog cabinets:
- Out-of-square walls and uneven ceilings, which are common in older homes and in condo towers.
- Columns, soffits, beams and window placements that don't line up with standard widths.
- Full-height storage to the ceiling, without a gap or a bulky crown to hide one.
- Panels on refrigerators and dishwashers that line up exactly with the cabinets around them.
- Pieces that don't exist in any catalog: a curved end, a wall unit around a fireplace, a closet island, a bar.
At Delta Woodworks every job is custom. We measure the room ourselves, draw every cabinet to fit it, and build it in the USA in our Fort Lauderdale shop, with Blum hardware on every door and drawer. You can see the machines and the process on our Our Mill page.
How do they compare on fit, materials and lead time?
Fit
Stock and RTA fit the room with fillers. Semi-custom fits better because there are more sizes and modifications. Custom fits the room itself. In a kitchen that's open to the living room, which describes a lot of South Florida homes and condos, that difference is visible every day.
Materials
Box material varies more than people expect. Many stock and RTA cabinets use melamine-faced particleboard, which is flat and inexpensive but swells permanently if water gets into an edge or a screw hole. Semi-custom lines often offer plywood as an upgrade. We build our boxes from Columbia Forest plywood. The full comparison is in plywood vs particleboard vs MDF, and the climate side is in our South Florida humidity guide.
Hardware
Hinges and drawer runners are where cheap cabinets show their age first. Ask for the brand and model, not just "soft close." Every job we build uses Blum; here's what that means.
Lead time
Stock can be fast if it's in stock. Semi-custom depends on the factory and shipping. Custom depends on the shop building it. Our standard lead time is 4–8 weeks after drawings are approved, built in our own shop. We explain the whole timeline in how long custom cabinets take.
Cost
Generally stock and RTA cost the least, semi-custom sits in the middle and custom costs the most per cabinet, but the ranges overlap more than you'd think. A high-end semi-custom line with every option can cost as much as a custom kitchen. What drives the price is covered in what custom cabinets cost in South Florida.
Which one is right for you?
- Choose stock or RTA for a rental, a utility space or a short-term fix, where budget and speed come first.
- Choose semi-custom if your room is fairly standard, a catalog layout fits well, and you're happy with the line's finishes and options.
- Choose custom if the room is unusual, you want cabinetry to the ceiling or around architecture, you want specific materials and hardware, or the kitchen is the centerpiece of an open plan. Custom also makes sense when you want the same look carried through the kitchen, closets, wall units and vanities.
How to tell what you're really being quoted
The labels aren't regulated, so ask directly:
- Are the box sizes from a catalog, or drawn to my measurements?
- Who builds the cabinets, and where? Is it your shop or a factory you order from?
- What are the boxes, shelves and backs made of?
- What brand of hinges and drawer runners, and which models?
- Who measures, and who installs? Your crew or a subcontractor?
- If a part is damaged, how long does a replacement take?
There's a longer checklist in questions to ask a custom cabinet maker.
See the difference in person
The easiest way to compare is to open drawers and look inside boxes. Our showroom is at the shop, 2416 S Andrews Ave, Fort Lauderdale, FL 33316, and we work across Broward, Miami-Dade and Palm Beach County, north to Tequesta. See our custom kitchen cabinets or call 954-939-8579.

