Wood-grain closet with open shelving, hanging rods and drawers
Home / Blog / Blum soft-close hinges and drawer runners, explained
Hardware

Blum soft-close hinges and drawer runners, explained

What Blum hardware is, how soft-close hinges and undermount drawer runners work, and the options worth knowing about before you choose custom cabinets.

Every door and drawer on every Delta Woodworks job runs on Blum hardware. It's the part of the cabinet you touch every day, and it's the part most people notice first in a cheap kitchen: doors that slam, drawers that rattle, fronts that drift out of line.

Who Blum is

Blum is a family-owned hardware company from Austria that makes hinges, drawer runners, drawer systems and lift systems for cabinets. It's one of the most widely used names in the cabinet industry, and its parts show up in a lot of high-end European and American cabinetry.

Because Blum is Austrian, we're careful with our wording. Our cabinets are designed, fabricated and built in the USA in our Fort Lauderdale shop, from Columbia Forest PureBond plywood, with Blum hardware. That's accurate, and we'd rather say exactly what's true than put a blanket origin label on something that includes imported parts.

Hinges

Most modern cabinet doors hang on concealed hinges, sometimes called European or cup hinges. A round cup is bored into the back of the door, and the hinge clips onto a mounting plate screwed to the cabinet side. You can't see them when the door is closed.

Three things make a good concealed hinge:

  • Soft close. A damper inside the hinge or the cabinet catches the door in the last few inches and closes it quietly, so doors don't slam. Blum calls its soft-close technology BLUMOTION.
  • Adjustment. Good hinges adjust in three directions (side to side, up and down, in and out), so the installer can line up the gaps between doors perfectly. That adjustment is also how small shifts get corrected years later.
  • Clip-on mounting. Blum's CLIP top hinges snap onto their plates, so doors can come off for painting or cleaning and go back on without losing their adjustment.

There are also special hinges for corner cabinets, thick doors, glass doors and doors that need to open wider than usual, such as doors in front of pull-out shelves.

Drawer runners

Drawers are where hardware quality shows most. Blum's undermount runners, such as its TANDEM and MOVENTO lines, mount underneath the drawer box, so they're hidden when the drawer is open. They extend fully, so you can reach the back of the drawer, and they close softly.

Blum also makes complete drawer systems such as LEGRABOX, where the sides of the drawer are slim metal and the runners are built in. They give a clean, modern look inside the drawer.

The details worth asking about:

  • Full extension: can you see and reach the whole drawer?
  • Load rating: is the runner rated for what you'll put in it? Pot drawers and pantry pull-outs need heavier-duty runners than a cutlery drawer.
  • Soft close or push-to-open: do you want handles, or handleless fronts?

Handleless: TIP-ON

For a handleless look, Blum makes TIP-ON (push-to-open) mechanisms: press the front and the door or drawer pops open. TIP-ON BLUMOTION combines push-to-open with soft close on drawers. It's popular in modern kitchens, closets and media walls where handles would break up a clean face. We'll talk through whether handleless suits how you use the room; it isn't for everyone.

Lift systems for upper cabinets

Upper cabinets with doors that lift up instead of swinging out use lift systems, which Blum sells as AVENTOS. They hold the door open at any height and close softly. They're a good fit over a coffee station, above a fridge, or anywhere a swinging door would be in the way.

Accessories worth knowing about

Beyond hinges and runners, there are pull-outs and inserts that make cabinets easier to use: dividers and cutlery inserts for drawers, pull-out waste bins, spice and tray pull-outs, and corner solutions that bring blind-corner storage within reach. Tell us how you cook and what you store, and we'll plan the inside of the cabinets along with the outside.

Why hardware and boxes go together

Hardware is only as good as what it's screwed into. A soft-close hinge mounted in a box that's out of square won't close well, and runners screwed into particleboard can loosen over time. That's why we pair Blum with plywood boxes built in our own shop. Read plywood vs particleboard vs MDF and why we use Columbia Forest plywood.

Looking after it

  • If a door gap drifts, a hinge adjustment usually fixes it in a minute. Call us if you're not sure which screw does what.
  • Keep runners free of crumbs and grit; a dry cloth or a vacuum is enough. Don't oil them.
  • Don't overload drawers beyond what they were built for. Tell us at design time what will go in each one.

More on care in our cabinet care guide.

See it working

Hardware is something you have to feel. At our Fort Lauderdale showroom you can open and close soft-close doors, push-to-open drawers and lift-up uppers on finished cabinetry. Then look at how it comes together in our kitchens, custom closets and finished projects.

Want to see the materials?

Our showroom has PureBond boxes, Blum hardware and finish samples you can handle. Stop by S Andrews Ave or call ahead.