White traditional wall unit with walnut counters, frosted-glass base doors and wall sconces
Home / Service areas / Palm Beach County / Town of Palm Beach
Town of Palm Beach, Palm Beach County

Custom cabinets in the Town of Palm Beach

Homes and condos on the island across the Intracoastal from West Palm Beach. Built in our Fort Lauderdale mill and installed by our own crew.

Town of Palm Beach

We serve the Town of Palm Beach

Every cabinet is built in our Fort Lauderdale mill and installed by our own crew. You choose the finish at our showroom; we cut and assemble the cabinets in our shop, and our crew sets them in your rooms.

The Town of Palm Beach is on a barrier island between the Intracoastal and the ocean, across the water from West Palm Beach. Work on the island ranges from a condo unit with a fixed layout to a house with formal rooms, existing millwork and a closet that is a room of its own. In both, the finish matters as much as the fit.

Faces can be paint, stain, lacquer, real wood veneer or high-pressure laminate, chosen for the room and for how hard the piece will be used. We compare them with you at the showroom, then measure every wall ourselves and draw the cabinets at the real height. You approve the drawings before anything is cut. Boxes are Columbia Forest PureBond plywood, and doors and drawers run on Blum hardware. Lead time is 4–8 weeks after sign-off.

The Town of Palm Beach is north of our shop at 2416 S Andrews Ave. It's a longer drive than a Broward job, so we plan for one thorough measure, drawings for your sign-off, and an install scheduled to finish in as few trips as possible.

4.8 stars from 87 Google reviews · Read them on Google

What we build for the Town of Palm Beach

White walk-in closet with a black marble island, mirrored wardrobe doors, floor-to-ceiling cabinets and a crystal chandelier

Shown: white walk-in closet with a black marble island, mirrored wardrobe doors, floor-to-ceiling cabinets and a crystal chandelier. A finished Delta Woodworks job. We don't publish client locations.

Homes & buildings

Finish, fit and an island climate

Choosing the finish comes first. A painted or lacquered door suits a formal kitchen; a real wood veneer brings grain into a library or a study. It's easier to choose when you see the finishes side by side, under light like your room's, so bring photos to the showroom and compare samples against them.

In a room with existing millwork, the new work should sit quietly next to it. We measure the windows, doors and trim, and draw bookcases and paneling around them rather than covering a window or leaving an awkward strip of wall.

A walk-in closet in a house like this is planned like a kitchen: hanging, drawers, shoes, often a center island, and lighting that's part of the drawing. Glass-front wardrobes work for things you want to see; the drawers below hold everything else.

The island sits in salt air and humidity all year. Plywood boxes with sealed edges are a better starting point than particleboard here, and a house kept air-conditioned helps keep doors square and adjusted. If your building or community has contractor rules — access hours, parking, work hours — send them with your photos. We coordinate the install with your building management.

Before you start

Before you start in the Town of Palm Beach

  • List every room in the scope, so one measure covers the job and the finishes can be chosen together.
  • Photograph existing trim, windows and any millwork the new work has to sit next to.
  • Measure, or let us measure, ceiling heights; they change the kitchen, library and closet drawings.
  • Send appliance, sink and faucet model numbers before we draw.
  • Send your building's or community's contractor rules, and visit the showroom on S Andrews Ave, south of the island, to compare finishes, or start with a call to 954-939-8579 and photos.
How it works

From first visit to install in the Town of Palm Beach

Call or visit

Call 954-939-8579 and send photos, or drive south to the showroom to compare finishes. A list of every room in the scope helps us plan one measure.

We measure on site

We come to your home in the Town of Palm Beach and measure the room ourselves before anything is drawn.

Drawings you approve

The drawings show every wall at the real height, with the finish chosen for each room. You approve them before we cut, and the build usually takes 4–8 weeks.

Installed by our crew

Our crew brings it from the mill to the island, sets every door and drawer and walks you through the finished room.

FAQ

Town of Palm Beach FAQ

Which finishes can we choose from?

Paint, stain, lacquer, real wood veneer or high-pressure laminate, chosen for the room and for how hard the piece will be used. Compare them side by side at our showroom on S Andrews Ave.

Can you build a library or a paneled study?

Yes. We measure the windows, doors and existing trim, and draw the bookcases, paneling and desk around them, at the real ceiling height.

Do you work in buildings with contractor rules?

Yes. Send us the building's access hours and work rules with your photos. We coordinate the install with your building management and plan the work around those rules.

Planning work in the Town of Palm Beach?

Start with a call, or come see the finishes at our showroom on S Andrews Ave before we measure in the Town of Palm Beach.