Light wood-grain kitchen with a stone-top island, gold globe pendants and a stone backsplash behind the range hood
Palmetto Bay, Miami-Dade County

Custom cabinets in Palmetto Bay

Single-family houses in a south Miami-Dade village. Built in our Fort Lauderdale mill and installed by our own crew.

Palmetto Bay

We serve Palmetto Bay

Every cabinet is built in our Fort Lauderdale mill and installed by our own crew.

Palmetto Bay is a village in south Miami-Dade, south of Pinecrest. In a house that has been added onto or opened up, the problem is different from a brand-new builder box: walls aren't always square, a kitchen may sit in a space that used to be two rooms, and a primary closet may have been carved out of a former bedroom.

Those conditions are why we measure on site and why the drawings follow the room as it is, not the original floor plan. We scribe cabinets to the walls we measured. You approve the drawings before we cut. Lead time is 4–8 weeks after that.

In a house like this, the rooms that usually need the work are kitchens, walk-in and reach-in closets, and bathroom vanities — the parts of a house that get used every morning and show their age first. Boxes are Columbia Forest PureBond plywood, which is a better choice than particleboard in a humid climate, and doors and drawers run on Blum hardware.

Palmetto Bay is about a 50-minute to one-hour drive south of our shop at 2416 S Andrews Ave, depending on traffic, similar to Pinecrest and a little farther than Coral Gables.

4.8 stars from 87 Google reviews · Read them on Google

What we build for Palmetto Bay

  • Kitchen cabinets: drawn to the room as it stands now, including additions and opened-up walls.
  • Closets: walk-ins and reach-ins planned around hanging, drawers and shoes.
  • Bathroom vanities: floating or floor-standing vanities sized to the wall and the plumbing.
  • Built-ins: bookcases and media walls along a living-room or family-room wall.
  • Laundry cabinets: a counter, tall storage and a place for a sink if the room has one.
Floating wood vanity with black stone top beside a slatted wood wall

Shown: floating wood vanity with black stone top beside a slatted wood wall. A finished Delta Woodworks job. We don't publish client locations.

Homes & buildings

Houses that have already been lived in

A kitchen in an older, added-on house often has a history: a later family room, a widened opening, a ceiling that isn't one height all the way across. Stock cabinets deal with that by adding fillers. We deal with it by measuring and drawing the run to the real walls, then scribing at install so the line against the wall is tight.

Closets in older or added-on houses are rarely a clean rectangle. We plan hanging, shelves and drawers around the actual width, any soffit or sloped ceiling, and what you want to store. Vanities have the same constraint: the wall, the window and the plumbing already exist, and the cabinet has to respect them.

Because the drive is longer than a Broward job, we plan the measure and the install tightly: one thorough measure, drawings you sign off, and an install scheduled to finish in as few trips as possible. The construction does not change with the mileage.

Humidity is part of every South Florida house. Plywood boxes and a sealed edge matter. If a laundry or a vanity sits on an exterior wall, tell us at the measure so we can talk about the finish. The humidity guide is worth reading before you choose a door style.

Before you start

Before you start in Palmetto Bay

  • Photograph the kitchen from several angles, including the ceiling, the windows and any place a wall was obviously moved or opened.
  • Photograph the closets and bathrooms you might include, with the doors open so we can see the depth.
  • If you have old floor plans, bring them, but we will still measure the room as it is today.
  • Send vanity and appliance model numbers, and note any plumbing you want to leave in place.
  • A showroom visit is a 50-minute to one-hour drive north; if a trip to Fort Lauderdale is hard to schedule, start with a call and photos, and we'll set a measure.
How it works

From first visit to install in Palmetto Bay

Call or visit

Call, or plan the 50-minute to one-hour drive north to the showroom. For a kitchen like the one pictured, photos of the room, the windows and the existing openings are a good start.

We measure on site

We come to your Palmetto Bay home and measure the room ourselves before anything is drawn.

Drawings you approve

In a house that's been added onto, we measure every wall and scribe to fit, and the drawings follow what we measured. You approve them before we cut, and the build usually takes 4–8 weeks.

Installed by our crew

Our crew brings it from the mill to Palmetto Bay, sets every door and drawer and walks you through the finished room.

FAQ

Palmetto Bay FAQ

Do you serve Palmetto Bay?

Yes. We serve Palmetto Bay. We build in our Fort Lauderdale mill and install with our own crew.

How far is the shop?

About a 50-minute to one-hour drive south from our shop at 2416 S Andrews Ave in Fort Lauderdale, depending on traffic.

The house has been added onto. Can you still build tight cabinets?

Yes. We measure the room as it is, not the original plan, and we scribe the cabinets to the walls at install.

Do you build bathroom vanities as well as kitchens?

Yes. Vanities are sized to the wall and to the plumbing that's already there, or to a plan you and your plumber have agreed on.

How long does it take?

Lead time is 4–8 weeks after drawings are approved.

Planning work in Palmetto Bay?

Start with a call, or come see the finishes at our showroom on S Andrews Ave before we measure in Palmetto Bay.