Wet bar wall with a wine fridge and lit shelves beside tall panel-ready cabinets in a light wood-grain finish
Home / Service areas / Broward County / Wilton Manors
Wilton Manors, Broward County

Custom cabinets in Wilton Manors

A small city between Fort Lauderdale and Oakland Park. Built in our Fort Lauderdale mill and installed by our own crew.

Wilton Manors

We serve Wilton Manors

Every cabinet is built in our own Fort Lauderdale mill and installed by our own crew. Wilton Manors is close to the shop, and the construction is the same as for any job we build.

Wilton Manors is a small city in Broward County, between Fort Lauderdale and Oakland Park. In a house built for having people over, the cabinets that matter most are often outside the kitchen: a bar in the living room, a media wall for the evening, a run of cabinets on the patio.

We draw those pieces with the same care as a kitchen. A bar gets a planned opening for the wine fridge, lighting that's in the drawings rather than added later, and a door style that matches the kitchen if both are in the job. A media wall gets a cable path and room for the devices to breathe. You approve the drawings before anything is cut. Boxes are Columbia Forest PureBond plywood, and doors and drawers run on Blum hardware. Lead time is 4–8 weeks after the drawings are approved.

Wilton Manors is north of our shop at 2416 S Andrews Ave, in central Broward.

4.8 stars from 87 Google reviews · Read them on Google

What we build for Wilton Manors

Walnut-tone panel TV wall with stone side panels, a low credenza and an open display cabinet

Shown: walnut-tone panel TV wall with stone side panels, a low credenza and an open display cabinet. A finished Delta Woodworks job. We don't publish client locations.

Homes & buildings

Rooms for having people over

A home bar works when it's planned like a small kitchen. Start with the equipment: the wine fridge, an ice maker or a small sink, if you want one. Send the models before the drawings, so the openings and the ventilation gaps are built for them. Then decide what should be on show — bottles, glasses, a few pieces of display — and what belongs behind doors.

Lighting changes a bar more than almost anything else. Lit shelves and glass fronts only work if the light positions and the wire paths are in the drawings before the cabinets are built, so the power can be brought to the right spot.

Think about traffic, too. A bar should sit where people can stand around it without blocking a hallway or the path to the kitchen. In a smaller living room, a bar can share a wall with the media wall, drawn as one piece so the two don't compete.

Outdoors, a patio kitchen is not indoor cabinets set outside. We go through materials and hardware made for sun and rain at the measure, and the outdoor run can be planned with the indoor kitchen so the two work together.

Before you start

Before you start in Wilton Manors

  • Decide where people gather, and photograph the wall where you'd like a bar or a media wall.
  • Send wine fridge, ice maker, sink and TV models before we draw.
  • List what the bar should display and what it should hide.
  • If you want an outdoor kitchen, photograph the patio and note how much of it is covered.
  • Visit the showroom on S Andrews Ave, south of Wilton Manors, to see lit shelving and door finishes in person.
How it works

From first visit to install in Wilton Manors

Call or visit

Call, or drive south to the showroom. Photos of the room where you entertain and a list of the equipment are a good start.

We measure on site

We come to your Wilton Manors home and measure the room ourselves before anything is drawn.

Drawings you approve

The drawings show the bar, the media wall or the kitchen with every opening and light position in place. You approve them before we cut, and the build usually takes 4–8 weeks.

Installed by our crew

Our crew brings it from the mill to Wilton Manors, sets every door and drawer and walks you through the finished room.

FAQ

Wilton Manors FAQ

Can you build a home bar with a wine fridge?

Yes. Send the fridge model before the drawings, and we build the opening and the ventilation gaps to its specs, with storage and display around it.

Can bar shelves and glass cabinets be lit?

Yes, if the lighting is in the drawings. The light positions and wire paths go in before the cabinets are built, so each shelf or cabinet can get its own light.

Can a bar share a wall with the TV?

Yes. In a smaller living room, the bar and the media wall can be drawn as one piece, with the cable path, the devices and the bar storage planned together.

Planning work in Wilton Manors?

Start with a call, or come see the finishes at our showroom on S Andrews Ave before we measure in Wilton Manors.