Light oak tall cabinets around a stainless double refrigerator and double wall ovens
Home / Service areas / Broward County / Deerfield Beach
Deerfield Beach, Broward County

Custom cabinets in Deerfield Beach

Condos near the water and houses inland, on the Palm Beach County line. Built in our Fort Lauderdale mill and installed by our own crew.

Deerfield Beach

We serve Deerfield Beach

Every cabinet is built in our own Fort Lauderdale mill and installed by our own crew. The people who measure your rooms work for the same shop that cuts the boxes and sets the doors.

Deerfield Beach is in northern Broward County, on the ocean and the Intracoastal, with Boca Raton across the county line to the north. That puts two very different kinds of job in one city: a condo unit where the walls, the plumbing and the appliance spots are fixed, and a house inland where the layout is yours to change.

We draw both the same way. We measure the room ourselves, draw every run to those numbers, and you approve the drawings before anything is cut. Boxes are Columbia Forest PureBond plywood, edge-banded in our shop, and every door and drawer runs on Blum hardware. Lead time is 4–8 weeks after the drawings are approved.

Deerfield Beach is north of our shop at 2416 S Andrews Ave, toward the Palm Beach County line.

4.8 stars from 87 Google reviews · Read them on Google

What we build for Deerfield Beach

  • Condo kitchens: full-height cabinets and integrated appliances drawn to a fixed layout.
  • Bathroom vanities: floating vanities sized to a compact bath and the plumbing already there.
  • Custom closets: reach-ins and walk-ins that hold more than a single rod and a shelf.
  • Media walls: TV and display walls with the cables and devices planned in.
  • House kitchens: islands, pantries and drawer storage when the layout can change.
Floating wood vanity with black stone top beside a slatted wood wall

Shown: floating wood vanity with black stone top beside a slatted wood wall. A finished Delta Woodworks job. We don't publish client locations.

Homes & buildings

Near the water, and inland

In a condo near the beach, most of the planning is about the layout you can't move. The sink, the range and the refrigerator usually stay where they are, so the work is in using the height and the depth: cabinets to the ceiling where it allows, drawers instead of deep shelves, and a closet planned around what you own. If your building has work-hour or access rules, send them early. We coordinate the install with your building management.

In a house away from the water, the questions change. You may be able to move the island, open a wall or turn a closet into a pantry. Tell us at the measure what you're willing to change, so the drawings can show it before anything is cut.

Salt air and humidity reach both. Plywood boxes with sealed edges are a better starting point than particleboard in this climate, and a house kept air-conditioned helps keep doors square and adjusted. If a vanity or a laundry sits on an exterior wall, mention it at the measure so we can talk about the finish.

Because both kinds of job come out of the same mill, a condo kitchen and a house kitchen get the same construction. The difference is in the drawings, not the box.

Before you start

Before you start in Deerfield Beach

  • In a condo, ask the building what it requires for contractor access and work hours, and send us those rules with your photos.
  • Photograph the kitchen, the baths and the closets with the doors open, so we can see the depth.
  • Send appliance model numbers before the drawings; in a condo the openings usually have to match the existing services.
  • In a house, list any wall, island or pantry change you're considering, even if you're not sure yet.
  • Visit the showroom on S Andrews Ave, south of Deerfield Beach, to open doors and compare finishes before we measure.
How it works

From first visit to install in Deerfield Beach

Call or visit

Call, or drive south to the showroom on S Andrews Ave. Photos of the room, the appliance list and, for a condo, the building's rules are a good start.

We measure on site

We come to your Deerfield Beach home and measure the room ourselves before anything is drawn.

Drawings you approve

Whether it's a condo with a fixed layout or a house you're opening up, the drawings follow what we measured. You approve them before we cut, and the build usually takes 4–8 weeks.

Installed by our crew

Our crew brings it from the mill to Deerfield Beach, sets every door and drawer and walks you through the finished room.

FAQ

Deerfield Beach FAQ

Can you work in a condo building near the beach?

Yes. We draw to the layout and the services already in the unit, and we coordinate the install with your building management. Send us the building's access rules and work hours with your photos.

Does living near the ocean change how the cabinets are built?

The construction is the same: Columbia Forest PureBond plywood boxes with sealed edges and Blum hardware. What changes is the conversation about finishes and where the cabinets sit, which we have at the measure and in the showroom.

Can you add storage to a condo kitchen without moving the plumbing?

Usually, yes. Taking cabinets to the ceiling, swapping deep shelves for drawers and using the ends of a run add storage while the sink and the appliances stay put.

Planning work in Deerfield Beach?

Start with a call, or come see the finishes at our showroom on S Andrews Ave before we measure in Deerfield Beach.