White shaker kitchen with gold pulls, a waterfall island and green floral stools
Home / Blog / Caring for your custom cabinets
Finishes

Caring for your custom cabinets

How to clean and look after painted, stained and natural wood cabinets, plus hardware, wet areas and South Florida humidity.

Good cabinets need very little care. Most of it is habit.

Everyday cleaning, for every finish

  • Use a soft cloth, slightly damp with water, then wipe dry. That handles most messes.
  • For grease, add a little mild dish soap to warm water, wipe, then rinse with a clean damp cloth and dry.
  • Wipe with the grain on wood finishes.
  • Dry everything. Water left sitting is the enemy of any finish.

Avoid: abrasive pads, scouring powders, ammonia, bleach, harsh solvents and steam cleaners. Avoid all-purpose sprays unless you've confirmed they're safe for cabinet finishes. Don't use silicone furniture polish; it can build up and make future touch-ups harder.

Painted cabinets

  • Painted finishes show grease and fingerprints, especially near handles and the cooktop. Wipe these areas regularly so buildup doesn't harden.
  • Dings happen. A small chip can usually be touched up; call us rather than reaching for a hardware-store paint.
  • Hairline lines can appear at the joints of painted frame doors as the wood moves with humidity. That's normal wood movement, not a defect in the cabinet.

Stained and natural wood

  • Grain hides small scratches well. For a light scuff, a damp wipe is often all it needs.
  • Sun changes wood color over time. Shades or window film in a sunny kitchen slow it down.
  • Don't use oil soaps or waxes unless we've confirmed they suit your finish.

High-gloss and lacquer

  • Gloss shows everything, so use a soft microfiber cloth to avoid fine scratches.
  • Don't use paper towels on high gloss; they can leave fine scratches.

More on the differences between finishes in paint vs stain vs lacquer.

Wet areas

  • Wipe up water at the sink, dishwasher and toe kicks right away.
  • Don't hang wet towels over cabinet doors.
  • After running the dishwasher, let the steam clear before opening it right under an upper cabinet edge.
  • Check under the sink now and then for slow drips. A water-sensor alarm is a cheap early warning.
  • Run the bathroom fan during and after showers to protect vanities.

Hardware

Every job we build uses Blum hinges and runners, which need very little care.

  • Keep drawer runners free of crumbs and grit. Vacuum or wipe with a dry cloth. Don't oil them.
  • If a door gap drifts, the hinge can be adjusted. Call us if you're unsure.
  • Don't overload drawers or hang on doors.

Read more in our Blum guide.

Humidity and the climate

South Florida's humidity is the biggest long-term factor for cabinets. Keep the air conditioning on, even when you're away, and run kitchen and bath fans. After a power outage, open cabinets and get air moving. See our humidity guide.

Inside the cabinets

  • Empty and wipe shelves once or twice a year.
  • Use liners under the sink and under oils and cleaning bottles.
  • Keep heavy items low.

When to call us

If a door won't stay aligned, a drawer won't close smoothly, or you see water damage or swelling, call 954-939-8579. Because we build everything in our own Fort Lauderdale shop, we can usually look at the problem quickly and, if a part needs replacing, make it ourselves. Learn more about us or see our kitchens.

Want to talk through your layout?

Call the shop, or visit the showroom with your measurements and a few photos.